|
|
|
|
DATACAD
LLC
Software
para AEC Professionals desde 1984
20
Tower Lane
Avon,
CT 06001
DATACAD México Luz Saviñón 2002 Narvarte
México
D.F. 03020
(55)
5669-2812 y 5669-2798
Ventas: ventasmex
@ datacad.com.mx
Soporte Técnico: soportemex @ datacad.com.mx WWW: www.datacad.com.mx Estimado
cliente DataCAD:
Gracias
por su interés en el DataCAD 11. Como parte de nuestra continua
dedicación a mejorar y entregar un producto CAD con las más
altas normas de calidad posibles, esta última versión incluye
las mejoras más pedidas por usted. Se le han hecho cambios fundamentales
incorporandole a DataCAD 11 de una mayor precisión, avisos de alerta
de uso de dibujos a través de la red, respaldo y restauración
dependientes, archivos de dibujo más compactos, una interface más
moderna, compatibilidad mejorada de DWG/DXF, nuevas herramientas de modelado,
y mejoras productivas. Estas nuevas características lo ayudarán
a compartir información de su dibujo con otras aplicaciones de windows,
trabajar simultaneamente con otras personas en el proyecto, y ahorrarse
tiempo. Para obtener lo máximo de DataCAD 11, por favor revise la
vista general que le damos a continuación. Si usted tiene dudas
acerca de DataCAD 11, contacte a nuestro equipo de soporte técnico
en soportemex @ datacad.com.mx.
Gracias
por apoyar a DataCAD,
Mark
F. Madura
|
|
|
|
|
|
DataCAD
11 Principales Nuevas características
|
|
Cómo accesar a una nueva característica.
Notas y ayudas útiles (Hints y tips) |
|
|
|
|
|
Compatibilidad
con versiones previas
|
|
|
DataCAD
11 es compatible con los mismos dibujos, símbolos, templates, tipos
de línea, hatch patterns, fonts, y DCAL® macros,
desde el DataCAD versión 4 hasta la 10.
|
|
|
|
|
|
Mejoras
de pantalla; Mejoras visuales
|
|
|
DataCAD's
graphic pipeline ha sido mejorado para aumentar el rendimiento. El
tiempo requerido para el Panning, Zooming, Dynamic Panning, y Scroll
Wheel Zooming ha sido reducido significativamente. Además,
In
addition, the Perspective Walk Through, Pan View setting is recognized
when you use either the scroll wheel or the dynamic panning method to walk
forward or backward or step up, down, left, or right respectively.
A new menu item, Scroll Dist., has been added to the Perspective, Walk
Through, Options menu to set the walk and step distance when you use the
mouse to navigate in a perspective view.
|
|
|
|
|
|
Base
de Datos de Doble-precisión
|
|
|
12345678901234...
DataCAD
11 usa procesos matemáticos de doble-precisión y de punto
flotante para calcular y almacenarlos valoresen la base de datos del dibujo.
Versiones anteriores de DataCAD tenían solo una exactitud efectiva
de ~7 dígitos después del punto. DataCAD 11 tiene una exactitud
efectiva de ~14 posiciones decimales. Esto significa que DataCAD 11 es
ahora más exacto que AutoCAD® y usted puede trabajar
en proyectos más grandes sin que tenga problemas por redondeo de
cifras, especialmente al importar dibujos extensos.
|
|
|
|
|
|
Aviso
de Alerta de uso en la RED
|
|
|
DataCAD
puede verficar si otras instancias de DataCAD están corriendo en
la RED y determinar si un archivo está o no siendo usado. Cada vez
que usted abre un dibujo, DataCAD registra la fecha, hora, usuario, y estación
de trabajo en el archivo (.U$R) correspondiente. Si usted trata de abrir
un dibujo que está siendo usado por alguien más, DataCAD
le hará saberlo y solo le permitirá abrir una copia de ese
dibujo.
|
|
|
|
|
|
Respaldo
y Recuperación
|
|
|
Hemos
reestructurado el proceso de respaldo y recuperación del DataCAD
para ser más confiable y menos confuso. Cada vez que salga anormalmente
de un dibujo, DataCAD atomáticamente tratará de recuperar
la versión más reciente de su dibujo sin necesidad de pedirle
nada o con alertas u opciones innecesarias.
|
|
|
|
|
|
File
Purge
|
|
 Los
archivos de DataCAD son automaticamente eliminados cada vez..files are
automatically purged of any unused data each time you exit and save your
drawing. In addition, a Purge dialog replaces the Layer Utility macro,
allowing you to create new drawings based on a sub-set of an existing drawing.
|
|
|
Archivos
de Dibujo Comprimidos
|
|
|
Los
dibujos actuales de DataCAD 11 son almacenados en modo comprimido que los
hace hasta una quinta parte más pequeña que las versiones
previas.
|
|
|
|
|
|
Respaldo
de Sesiones de Dibujo
|
|
|
Drawing
session backups is a new feature that allows you to configure DataCAD to
automatically save up to 10 incrementally-named backup drawings.
Session backups are only created each time you exit and save your drawing.
|
|
To access Drawing Session options, go the Misc. tab of Program Preferences.
A new drawing session is created only when you close and save your drawing.
You can have a maximum of 10 drawing sessions per file. |
|
|
Interface
con el Programa
|
|
 DataCAD
11 features an updated program interface that provides Windows 2000-style
properties and support for Windows XP Themes and "Skins". You can
position toolbars and menus where you want by tearing them off and docking
them to the top, bottom, left, or right side of the application window.
You can also place toolbars and menus outside of DataCAD to "float" on
the desktop, allowing you to resize the drawing area without adversely
affecting the user interface and to take advantage of dual monitor displays.
In addition, all of the interface elements in DataCAD 11 will inherit the
visual style of your current desktop theme. For more information
about Windows XP Themes, go to http://www.themexp.org. |
|
|
|
|
|
Catálogo
de Símbolos
|
|
 DataCAD
11 introduces an easier way to browse, select, and manage symbols.
The new Symbol Browser allows you to rapidly find, place, customize, and
manage symbols that you use in your drawings.
Inserting a symbol into your drawing involves little more than selecting
it from the Symbol Browser and dropping it where you want it. With
just a few mouse clicks, you can open the appropriate folder, display the
symbols in the browser, and select the ones you want to use into your drawing.
If you developed custom templates with older versions of DataCAD, you can
open them in the Symbol Browser, too. In effect, the Symbol Browser treats
file folders as templates that contain collections of symbols.
|
|
|
|
|
|
Campos
de definición de Símbolos
|
|
 It's
now possible to assign an unlimited number of user-defined fields to symbols
for enhanced reporting. You're no longer limited to the five default
fields.
|
|
|
|
|
|
Reporte
de Símbolos de campo
|
|
 We've
enhanced symbol reporting so you can run reports on all symbols in the
drawing instead of just the symbols in the active template. A new
dialog gives you access to report forms and displays an on-the-fly preview
of the results.
|
|
|
|
|
|
Atributos
de Texto para los Símbolos
|
|
 Text
attributes can be defined and added to symbols. This lets you use the same
symbol multiple times, supplying a unique text string for each one.
For example, you could use one desk symbol several times and label them
“Jim’s desk,” “Nancy’s desk,” and “Bob’s desk.”
|
|
|
|
|
|
Reporte
para los Atributos de Texto para los Símbolos
|
|
 Text
attributes can be defined and added to symbols. This lets you use the same
symbol multiple times, supplying a unique text string for each one.
For example, you could use one desk symbol several times and label them
“Jim’s desk,” “Nancy’s desk,” and “Bob’s desk.”
|
|
|
|
|
|
Borre
Símbolos directo de la imagen de polígonos
|
|
 A
new option available for inserting symbols allows you to drop any item
such as a tree directly on the surface of a polygon.
|
|
|
|
|
|
TIN
Surface Modeler
|
|
 A
new TIN (Triangulated Irregular Network) surface modeler provides a comprehensive
array of three-dimensional site modeling tools.The
TIN modeler can connect a random series of survey points (3D markers) with
triangular polygons. Once the polygons are generated, you can calculate
the surface area of TIN models, use the flip valley option to “flip” the
valley between coincident polygon edges, or create roads, foundation cuts,
etc. with the 3D Knife. The drop point option lets you place 3D markers
on the surface of inclined polygons. You can create polyline contours from
polygon site models.
|
|
|
|
|
|
Drop
Point
|
|
|
You
can place a three-dimensional marker on a polygon at an inclined point.
|
|
|
Make
Contours
|
|
|
You
can make a topological contour map based on a group of three-dimensional
points or polygons.
|
|
|
Ruled
Surface Modeler
|
|
 A
ruled surface function allows you to mesh polygon surfaces between Polylines
and Contours.
|
|
|
|
|
|
Navaja
3D
|
|
 A
three-dimensional knife allows you to interact with TIN surfaces to create
roads, sidewalks, and foundation cuts. You
can use the knife to cut out, raise, or depress irregular areas and paths
on the building site. Since DataCAD also calculates the volume of the affected
area, you can estimate the amount of fill that must be removed (if you
are digging for a foundation or a roadway) or added (if you are building
up part of the site). To differentiate the cut area, you can specify a
different color from the rest of the TIN model. Further, you can select
distinct colors for each level and/or side of the cut area.
|
|
|
|
|
|
Herramienta
para Seccionar
|
|
|
You
can easily create two-dimensional sections from three-dimensional models
using the new sectioning tool. Advanced options allow for automatically
hatching and updating sections. You can also create hidden line sections.
Straight, offset, and curved section paths are supported.
|
|
 |
  |
|
|
|
|
Multi-View
Windows
|
|
|
All-new
multi-view windows provide up to 10 tear-off, resizable windows you can
use to store and display various views of your project.
|
|
|
|
|
|
Expanded
Bitmap Support
|
|
|
The
number of supported image formats has been increased to include BMP, JPG,
GIF, TIF, TGA, PNG, PCX, EPS, and PCD files.
|
|
|
|
|
|
Stereolithography
|
|
|
You
can export your DataCAD models to STL format for use with rapid prototyping
machines including 3D printers. You can also import STL files into
DataCAD from other programs.
 
|
|
|
|
|
|
Importación
de Archivos de 3D Studio
|
|
|
You
can import 3DS files into your DataCAD drawings.
To import a 3D Studio file into your drawing, go to the Insert pull-down
menu and select 3DS file.
Select Explode, and toggle off Current Layer to distribute the objects
material definitions to individual layers. |
|
|
|
|
|
WHIP!
|
|
|
DataCAD
11 adds support for DWF format so you can view and distribute your drawings
via the Internet.
To export your drawing to DWF format, go to File, Export, DWF. |
|
|
|
|
|
Render
con o2c
|
|
|
We've
enhanced the interface for assigning materials to o2c objects so you can
control the origin, angle, and scale of any bitmap texture. In addition,
you are no longer limited to 32,768 polygons per material.
|
|
|
|
|
|
PDF
con Layers
|
|
|
Drawing
layers can now be included when you create a PDF file directly from DataCAD.
Note: Requires Adobe Reader version 6 to view layers. However, PDF
files created by DataCAD 11 can be read by Adobe Reader versions 4 and
5.
To create a PDF file with layers, select Save As from the print preview
window and enable Drawing Layers. |
|
|
|
|
|
Context-sensitive
Toolbar
|
|
|
A
user-definable, context-sensitive toolbar automatically changes to present
related icons based on the menu you choose. A configuration dialog
allows you to easily set which toolbar is related to a particular menu
selection.
|
|
|
|
|
|
Enhanced
Keyboard Macros
|
|
|
User-defined
keyboard macro sequences can now include up to 1,024 commands and there
is no limit to the number of characters you can use in the sequence.
We've also added a special PAUSE character so you can tell the macro to
wait until you do something such as click or type. Go to the Help
pull-down menu and select What's New? for more information.
|
|
|
|
|
|
Nested
Aliases
|
|
|
You
can call a command line alias by name when you define a macro sequence
so you can take advantage of existing aliases.
|
|
|
|
|
|
Classic-style
Menu Window
|
|
|
Classic Menu Window, Navigation Pad, Projection Pad, and Status Panel are available. To enable these classic-style elements, go to View, Toolbars. If you would also like to have the classic look of raised buttons, go to the Interface tab in Program Preferences and check Classic Buttons. |
|
|
|
|
Bitmap
Orphans Manager
|
|
|
A
new bitmap orphans manager allows you to redefine paths for bitmaps you've
already inserted into your drawing.
|
|
|
|
|
|
Nested
XREF Display Toggle
|
|
|
A
new option allows you to disable the display of nested external references
at the time you insert an XREF. You can also toggle the display of
nested external references on a per XREF basis via the Reference File Manager
or the context-sensitive pop-up menu. The display of nested references
can be disabled globally with the Display Nested XREFs option in the Nested
XREFs section of the Misc. tab of Program Preferences.
|
|
|
|
|
|
Duplicate
XREFs Use Same Memory Space
|
|
|
Multiple
XREFs of the same file now use a single memory space. Used in combination
with the Display Nested XREFs toggle, you can significantly reduce the
amount of memory required to open your drawings that contain XREFs.
|
|
|
|
|
|
Self-referencing
XREFs Use Same Memory Space
|
|
|
Multiple
self-referencing XREFs now use the same memory space so DataCAD no longer
creates a new swap file every time you reference a drawing into itself.
|
|
|
|
|
|
Plot
Scale Saved with GoTo Views
|
|
|
A
new option, Save with GoTo Views, has been added to the Current Plot Scale
section of the Misc. tab of Program Preferences. This lets you save
the current plot scale with a GoTo View when you create it.
|
|
|
|
|
|
Global
Line Overshoots
|
|
|
You
can now set the line overshoot value globally so that it applies to all
entities equally. The global line overshoot is scale-independent
and is defined as a real-world, plotted distance. You can access the Overshoots
menu from the Line Type menu. Note: Overshoot must be toggled on in the
Display menu in order to view/plot line overshoots.
|
|
|
|
|
|
Contour
Search Supports Line/Arc and Arc/Arc
|
|
|
The
contour search routine has been updated to handle line/arc and arc/arc
conditions that were not supported previously.
|
|
|
|
|
|
2-Line
Trim Supports Line/Arc and Arc/Arc
|
|
|
The
two line trim command has been updated to handle line/arc and arc/arc conditions
that were not supported previously.
|
|
|
|
|
|
Embedded
Line Types
|
|
|
Line
Types (up to 255) are now stored in your drawing file. Now, you don't
have to worry about providing custom line type definitions to your colleagues
when you give them copies of your drawings. DataCAD 11.01.00 automatically
converts your line type definitions from DCADWIN.LIN to individual .DLT
files stored in \DataCAD\Support Files\Line Types.
|
|
|
|
|
|
Creador
de Tipos de Línea
|
|
|
Now,
anything you draw can be converted into a new line type. The line
type creator allows you to select entities in your drawing (up to 65,536)
to define one segment of a custom line type. You can begin using
your new line type immediately.
|
|
|
|
|
|
Line
Type Manager
|
|
 A
line type manager has been added to the Line Type menu. Select Line Manage
from the Line Type menu to access a dialog for loading or re-loading external
line type definitions into your drawing. You can also set the End Correction
and Default Spacing for embedded line type definitions. |
|
|
|
|
|
Embedded
Hatch Patterns (Optimizado)
|
|
|
Embedded
hatch patterns have been optimized to require less memory. DataCAD 11.01.00
automatically converts your hatch pattern definitions from DCADWIN.PAT
to individual .DHP files stored in \DataCAD\Support Files\Hatch Patterns.
|
|
|
|
|
|
Hatch
Pattern Manager
|
|
 A
hatch pattern manager has been added to the Hatching menu. Select Manage
from the Hatching menu to access a dialog for loading or re-loading external
hatch pattern definitions into your drawing. You can also set the angle
and scaling for embedded hatch pattern definitions. |
|
|
|
|
|
Calibración
de Pantalla
|
|
 Using
the Screen Calibration dialog, accessible from the Interface Settings tab
of Program Preferences, you can measure the test pattern in either decimal
inches or millimeters in order to adjust both the screen scaling and aspect
ratio. |
|
|
|
|
|
Menú
Mejorado sensible al Contexto
|
|
  An
Identify section has been added to the context-sensitive ([Ctrl] + Right-click)
menu for quick access to Identify Set and Set All options. XREF-related
options have been grouped together in an XREF Tools fly-out menu that provides
quick access to the following options. |
|
|
Revisión
del Histórico
|
|
Revisado: 30 junio 2005 |
|
|
Traducido por REDICOM, S. de R.L.
de C.V. Derechos Reservados.
|
|
